M12 connectors Product appearance and structure requirements

 M12 connectors Product appearance and structure requirements

6.3.1 the appearance and structure of the product shall meet the requirements of 4.3 in GB / T 9813-2000. M5 connector

6.3.2 the digital video host shall have light indication to show the working status of the host.

6.3.3 there shall be a wiring base in the digital video host cabinet, and the external leads shall be marked with numbers or characters. The lead-in line of AC power supply is in the form of plug socket or welding (plus protection and isolation). usb camera module

For bench measurement, the angle standard value Wireless WiFi Driver Free Camera Module

For bench measurement, the angle standard value Wireless WiFi Driver Free Camera Module (45°/30°) can be used for direct sunlight measurement (see SAE J1757/1:2007).

For matrix displays, measurements should be made on a collection area that covers at least (3×3) the conduct (see Figure 3). If the measurement area is smaller than (3×3), the measurement accuracy will decrease. If the character area to be measured does not contain at least (3×3) pixels or the photometer spot size is larger than the character area, find an area with at least (33) size on the character and visually seem to have the same brightness. Measure this area. m12 connector

For segmented display, the measurement should be performed within the segmented segment. The diameter of the collection area should be less than 80% of the relevant size of the section to be measured. M23 connector

500W autofocus camera module webcam module M8 M12 connector cable

 500W autofocus camera module webcam module Character overview

If sufficient contrast between the role and its background cannot be provided (for example, with a dynamic background), other means should be used. This can be the outline around the character, in which case minimum contrast should be provided between the body of the character / unfilled area and its outline. m8 connector

For characters with serifs, the stroke width of the height ratio of outline characters should be less than 0.04, and for characters without serifs, it should be less than 0,08. If the size of the character is so small that the stroke width of the outline is less than 0.35 mm, avoid using the outline to ensure readability (see Figure 2). M12 connector