For bench measurement, the angle standard value Wireless WiFi Driver Free Camera Module

For bench measurement, the angle standard value Wireless WiFi Driver Free Camera Module (45°/30°) can be used for direct sunlight measurement (see SAE J1757/1:2007).

For matrix displays, measurements should be made on a collection area that covers at least (3×3) the conduct (see Figure 3). If the measurement area is smaller than (3×3), the measurement accuracy will decrease. If the character area to be measured does not contain at least (3×3) pixels or the photometer spot size is larger than the character area, find an area with at least (33) size on the character and visually seem to have the same brightness. Measure this area. m12 connector

For segmented display, the measurement should be performed within the segmented segment. The diameter of the collection area should be less than 80% of the relevant size of the section to be measured. M23 connector

camera module for The ambient light measured on the display surface M12 connector

 camera module for The ambient light measured on the display surface m12 connector (on standard diffuse reflectors) shall be 250 LX with a relative tolerance of ± 5%. If the display is set manually or automatically to night setting (e.g. triggered by headlamp switch or solar load sensor), the displayed information shall meet the requirements of 4.3.2 in night setting. If the driver can manually change the display setting to a higher contrast, the measurement can be made in the display setting. M9 connector.

The construction of usb camera control room shall meet the following requirements:

The construction of usb camera control room shall meet the following requirements:

1. The construction of control room shall meet the design requirements and comply with the relevant provisions of the current national standard "code for construction and acceptance of electronic information system room" (GB 50462 connector).

2. The installation of cabinet and rack shall comply with the relevant provisions of the current national standard "code for quality acceptance of intelligent building engineering" (GB 50339 M12 connector).

3. The termination of all kinds of jumpers and cables shall comply with the relevant provisions of the current national standard code for acceptance of generic cabling system engineering (GB 50312).

4. The installation of the console shall meet the following requirements:

1) The installation of the console shall meet the design requirements.

2) The console should be placed on the horizontal ground, and should be stable and firm.

3) The accessories shall be complete without damage; the table top shall be clean without scratches.

4) The wiring in the console should be arranged reasonably and orderly; the connector should be contacted reliably and installed firmly.

5. The grounding of control room shall meet the design requirements.

5.2.8 lightning protection and grounding of the system shall meet the design requirements, and shall comply with the relevant provisions of the current national standards "code for construction and acceptance of grounding device of electrical installation engineering" GB 50169 and "code for acceptance of construction quality of building electrical engineering" (GB 50303).

M12 connector pictures

M12 connector pictures

M12 pictures

M12 cables are rapidly developed in the case of growing demand.

M12 field wireable connectors can be divided into Straight and Right Angled Field Installable connector by different enclosure shapes. This type of M12 connector can provide fast connections in the field automation system and other industrial applications. Their environment protection achieves IP67 and IP68.
With the rapid development of industrial automation technology, automation system integrated more and more equipments, including sensors, actuators, etc. These devices need to have a stable and reliable cable to provide power supply and signal transmission, and need to work in the complex environment and with the function of waterproof, dustproof, corrosion resistant. M12 cables are rapidly developed in the case of growing demand.
M12 cable can be divided into soldering type, screw terminal type according to the connection methods. According to assembly methods, it can be divided into assembly type,molding type, panel mounting type. According to encoding mode, it can be divided into A coding, B coding, C coding, D coding, P coding, S coding, T coding, X coding. According to the shape, it can be divided into 180 degree straight M12 cable, 90 degrees right angled M12 connector cable, M12 T shape cables, M12 Y shape cables. At the same time it is also classified as two types of shielded and not shielded M12 cable. According to the pin or core number, there are 3 pin, 4 pin, 5 pin, 8 pin, 12 pin or 3 pole, 4 pole, 5 pole, 8 pole, 12 pole. The material of M12 cable jacket has PUR, PVC and so on.
XIMECONN can custom M12 cables with different types and cable length from our customer requirements. Our products conform to the norms of RoHS, CE, UL and with good quality, reasonable price, fast delivery time.

SpongeBob

SpongeBob

Have you seen the cartoon of SpongeBob?Look at the picture.He is SpongeBob.SpongeBob is one of the most popular cartoon star for kids in the US.He is a sponge. SpongeBob is a cook in Mr Krabs’s restaurant.He likes his work very much and he is never late for work.He lives with his pet snail Gary under the sea. Gary can speak,but only one word,“Meow.”It usually means that he wants food. They have a lot of friends there.

SpongeBob likes to help everyone around him,but he often makes much trouble.He always sees everything on the good side.SpongeBob has two hobbies. One is biowing bubbles.The other is catching jellyfish with his friends.

Orange wheels in the city M12 connectors

1、Orange wheels in the city

There are bikes with“orange wheels”in many cities in China.A lot of people ride orange bicycles on the street.The bikes come from the Mobike company.Nowadays,the Mobike has become more and more popular.It’s not only good for the environment,but also very convenient.

Firstly,people open its app on the phone.Then,people scan the QR code on the bike to unlock it,they can park it somewhere properly.The Mobike is just like an ordinary bike!Many countries in the world have bikes like these,too.

Have you ever ridden a Mobike?Go and have a tru!

usb-c cable

M12 adapter

M12 connectors

One smaller support engages one end of the spring

The implementation scheme of the confluence bar connector assembly may include the construction of a dynamic pressure head into a conical annular part and two spacing strips, which are fixed to the annular part and constructed to be fixed to the confluence strip. The annular portion may have an incision formed therein for ventilation. The two spaced strips can extend in the longitudinal direction perpendicular to the conical annular part. The spaced strip may have an opening formed therein to fix the spaced strip to the confluence strip. The hydrostatic head may comprise a conical annular portion and a connector portion which is constructed to be fixed to an electronic device. The connector part of the hydrostatic head can extend along the plane perpendicular to the axis of the conical annular part. The connector portion may have an opening formed therein to fix the connector portion to an electronic device. The connector may include an adaptive connector constructed to receive in a conical annular portion of the dynamic and static heads. The adaptive connector may have a first end constructed to receive in the conical annular portion of the hydrostatic head and a second end constructed to receive in the conical annular portion of the hydrostatic head. The adaptive connector may have an incision formed therein for ventilation. The connector also includes a spring bracket fixed to a dynamic pressure head and an adaptive connector, and a spring arranged in the spring bracket. The spring support may have a first part constructed to be fixed to the dynamic pressure head and a second part constructed to be fixed to the adaptive connector. The spring can be arranged in the central part of the adaptive connector and surround the second part of the spring bracket. The connector may also include two smaller supports constructed to be fixed in the central portion of the adaptive connector. One smaller support engages one end of the spring, and another smaller support engages the relative end of the spring.

Connection system lug connector and circuit breaker system

Connection system, lug connector and circuit breaker system. One of the purposes of the utility model is to solve problems related to one or more problems existing in the prior art. According to one aspect of the present utility model, a connection system for connecting an alternative energy power supply line to a power company power supply line at a circuit breaker is provided. The connection system includes: a clasp, which can be electrically connected to the far end of the alternative energy power supply line, and the clasp has a hole through which the screw and screw pass through the hole in the clasp; a contact ring, which accommodates the contact ring around the screw; and a retaining ring, which can keep the contact ring against the clasp ring to make the screw and the clasp contact electrically with each other. One of the beneficial effects of the utility model is that the circuit breaker design can be used in existing circuit breaker boxes, and no new circuit breaker boxes need to be installed.

usb-c cable M12 adapter vacuum bipolar RF socket

usb-c cable 

M12 adapter

vacuum bipolar RF socket

Flexible printed circuit boards can be divided into one-sided, two-sided and multi-layer boards. Polyimide copper clad laminates are the main substrates used. This material has high heat resistance, good dimensional stability, and the final product is made by pressing the covering film with both mechanical protection and good electrical insulation. Polyimide resin is a kind of heat-resistant resin with five negative rings of imide, which is represented by polyphenylenetetraacid produced by the reaction of oxygen-containing layer group and anhydrous phenylenetetraacid. The conductors used in flexible printed circuit boards are thin foil copper, which is called copper foil. Its manufacturing methods can be divided into electrolytic copper foil and calendered copper foil, in which calendered copper foil is the mainstream. In addition, the surface and inner conductors of double-sided and multi-layer printed circuit boards are metallized to realize the electrical connection between the inner and outer circuit layers.usb-c cable M12 adapter vacuum bipolar RF socket

M12 connector waterproof connector

 The assembly and tightening unit comprises a second clamping mechanism and a tightening mechanism movably connected to the frame, and the second clamping mechanism clamps and fixes the connection of the photovoltaic connector. The driving unit in turn drives the second clamping mechanism to move and cooperate with one end of the cable segment, and drives the tightening mechanism to tighten the cap.

As a preferred choice, the assembly tightening unit also includes a second light-controlled switch, which is arranged in the second clamping mechanism and controls the operation of the tightening mechanism when the terminals at one end of the cable segment and the connecting head are in place.

M12 connectors|vacuum bipolar RF socket|M23 circular connectors

Considering the use of harness environment, harness sheath is needed in extreme environment, such as high temperature, extreme cold, acid-base corrosion, oil pollution and wear.

It can be divided into PVC tube, PU tube, bellows, fiber net, foam tube and so on. The size of the pipe is marked by its diameter. The bigger the diameter, the thicker the pipe.

PVC pipes are widely used, mainly to prevent the wiring harness from spreading, smooth surface, hard in winter, brittle and fragile for a long time, there are openings and closures. Most of the colours are black.

PU pipe, smooth surface, soft material, long service life, there are openings and closures, the color is mostly black.

Fiber network management, the main role is to prevent the harness from spreading, relatively more flexible.

Bellows, mostly coarser wiring harness, oil resistance, acid and alkali resistance, etc.

M12 connectors

vacuum bipolar RF socket

M23 circular connectors