 |
| Industrial Ethernet M16 cable C091 and AISG meal assembly |
Sunday, May 3, 2020
Industrial Ethernet M16 cable C091 and AISG meal assembly
Industrial Ethernet M16 cable C091 and AISG meal assembly Before
the contact is inserted into the insulating mounting plate, the adhesive must
be used, and then the epoxy resin or silicon sealing compound shall be used for
pouring and sealing at the tail of the fixed connector and the free end
connector, which shall be placed in a vacuum vessel with a heating device to
exhaust until the gas is removed, and the pouring and sealing shall be conducted
at a suitable temperature. According to the engineering technical manual and
the conclusion drawn in the test, the air is ionized at about 7000 v,
Therefore, the connector needs to be sealed in use. The sealing process of
high-voltage connector is very sophisticated.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment