Communication Equipment M16 cable

Communication Equipment M16 cable Test instruments include:

1. Mounting fixture that allows the sample to be installed in a normal manner.

2. During the test, the force gauge or force distance gauge shall be placed in the proper position of the connector so that the reading pointer is in the middle of the gauge, so that the operation gauge can be accurate to ± 2%.

3. According to the requirements, the auxiliary measuring instrument shall match the test sample and be accompanied with the force measuring table and torque table (axial pressure, etc.).

b) . test steps

1. Unless otherwise specified, the sample shall be installed as normal.

Communication Equipment M16 cable

Communication Equipment M10 cable

Communication Equipment M10 cable Test method ා 13A -- Test Method for plug force of electronic connector

(from EIA recommendation No. 1653. Organized by EIA working group p-5.12.)

Note: tp-13a was previously published as tp-13 in EIA recommendation rs-364-3.

1. Purpose:

The purpose of this test is to introduce a standard method for determining the insertion force required for an electronic connector or its protective cover.

2. Sample preparation

The test sample consists of a plug and a contact socket. Unless otherwise specified, the sample shall consist of all available hardware including edges, hoods, clamps, screws, guides or sockets. Unless otherwise specified in the specification, the sample does not need to be lubricated or cleaned by any means.

3. Test method

a) . test instruments

Communication Equipment M12 x-code 8pins M30 connector

Communication Equipment  M12 x-code 8pins

Ximeconn has newly launched M12 x-code connector series, which conforms to iec61076-2-109 standard, and has cross shielding design to eliminate interference and unnecessary signals in signal transmission. Moreover, this connector meets the ultra-high requirements of signal transmission integrity from structural design and experimental test. The M12 x-code connector with 360 ° all-round shielding and cat 6A wire can achieve 10Gbps Ethernet transmission speed. Compared with the traditional RJ45 series or M128 core A-code connector (only supporting 10 / 100Mbps Ethernet transmission speed), there is no doubt that M12 x-code connector with more efficient transmission speed has more advantages.

M12 x-code connector is the most ideal solution for high-speed Ethernet transmission in wireless, camera, vision system and other harsh environments, because it not only has high-speed and robust data transmission characteristics, but also meets IP67 waterproof design.

Communication Equipment  M12 x-code 8pins 

Communication Equipment  M12 x-code 8pins 

Communication Equipment M16 connector

Communication Equipment M16 connector 

These are another embodiment of the struggle oriented. This care and consideration are not only "cool" on the body, but also warm in the heart. Everyone is happy to be able to work in such a company. Look at our production workshop, clean and bright floor, orderly U-shaped assembly line, such a spotless working environment, people feel more comfortable. Yes, we always pay attention to employees' feelings and create a good working environment for them. We have been improving

We believe that a good working environment can make employees happy physically and mentally, and can produce high-quality products. The level of enterprise management can be seen from the status of employees and the appearance of the factory.

Communication Equipment M12 connector

Communication Equipment M12 connector Ximeconn provides customers with male connector and panel type female connector with wire wrapping glue. The glue wrapping scheme can not only save the time of clients, but also provide a complete set of wire harness processing services. The PCB board inserting mode of panel type rear mount effectively saves the welding process. What's more amazing is that the x-code series has blind plug-in function, making it easier for customers to use.

Ximeconn will continue to launch a wide range of accessories series to expand the M12 x-code family, to meet or even exceed customers' changing needs.

 

Communication Equipment M12 connector

Industrial Ethernet M14 cable 19pin assembly

Industrial Ethernet M14 cable 19pin

Conclusion ① bronze is suitable for heat treatment. Solution treatment and subsequent aging treatment can significantly improve the mechanical properties of the alloy. ② The solution treatment of beryllium bronze is a process of stress relaxation and softening, and its plasticity is very good after solution treatment. ③ The aging treatment of beryllium bronze is a process of stress increasing and strengthening, and it has good elasticity after aging treatment. ④ The bright surface can be obtained by solution treatment and aging treatment in a protective atmosphere. When the surface quality of the material is not good, it can be pickled before solution treatment or aging treatment. ⑤ For the parts with strict size requirements, the correction after solution treatment and before aging treatment is very important. ⑥ The parts with hardness higher than the technical requirement after aging treatment can be saved by over aging treatment, and the bright surface can be obtained under the condition of atmosphere protection.

Industrial Ethernet M14 cable 19pin assembly

Industrial Ethernet M16 cable C091 and AISG meal assembly

Industrial Ethernet M16 cable C091 and AISG meal assembly Before the contact is inserted into the insulating mounting plate, the adhesive must be used, and then the epoxy resin or silicon sealing compound shall be used for pouring and sealing at the tail of the fixed connector and the free end connector, which shall be placed in a vacuum vessel with a heating device to exhaust until the gas is removed, and the pouring and sealing shall be conducted at a suitable temperature. According to the engineering technical manual and the conclusion drawn in the test, the air is ionized at about 7000 v, Therefore, the connector needs to be sealed in use. The sealing process of high-voltage connector is very sophisticated.

Industrial Ethernet M16 cable C091 and AISG meal assembly

Industrial Ethernet M12 cable 4pin 8pin 12pin 17pin

Industrial Ethernet M12 cable 4pin 8pin 12pin 17pin According to the engineering manual and the conclusion of the test, the air is ionized at about 7000 V, so the connector needs to be sealed in use. The sealing process of high-voltage connector is very sophisticated. The contact between contact and cable must be bonded with insulation mounting plate, and the insulator must be bonded with the shell of connector.

Industrial Ethernet M12 cable 4pin 8pin 12pin 17pin

Industrial Ethernet M6 connector

Industrial Ethernet M6 connector

Components of medical connector

Similar to smart phones, medical devices have shape requirements. Thanks to recent medical advances, surgeons can perform certain operations. Some medical devices allow surgeons to perform their complex operations, such as bypass surgery, by creating a small incision and inserting a laparoscopic camera. The success of these types of operations also depends on the complex components within the medical device, such as connectors, and the ability of the operating system to perform and optimize the function of the device.

Industrial Ethernet M6 connector

Industrial Ethernet M8 connector

Industrial Ethernet M8 connector It is better to increase the annealing temperature than to extend the annealing time, and the annealing temperature is about 110 ℃

The annealing time is more than 1 h, the effect is better. After considering all the above factors, it can reduce or eliminate the uneven internal stress distribution of polycarbonate medical products, avoid cracking in the high grease environment, and ensure the safety of the products in clinical application

Industrial Ethernet M8 connector

Industrial Ethernet M5 connector

Industrial Ethernet M5 connector

Orientation internal stress: in the injection molding process, it is better to have a higher mold temperature, which generally needs to exceed 120 ℃, and the barrel temperature should be appropriate, which should not be too high or too low

Energy M30 connector assembly

Energy M30 connector assembly

This series of hybrid connector also adopts the fast lock technology system, and its installation speed is three times faster than the traditional plug-in system. At the same time, the fast lock technology adopts self guided insertion and tactile design, which can complete blind insertion in the environment of no direct observation or limited space. And through the additional error proof design, it can greatly prevent the wrong plug-in and save a lot of installation time.

Energy M30 connector assembly

Energy circular connector male female assembly

Energy circular connector male female assembly

In order to cope with the high vibration environment caused by the operation of the motor in the factory, ximeconn M23 series hybrid connector has extremely high seismic resistance and strong design, which makes the connection more stable and reliable, and avoids the corresponding problems such as production downtime caused by connection problems. 

Energy circular connector male female assembly

Energy power battery connector PDU box connector

Energy power battery connector PDU box connector

The housing of the hybrid connector can be flexibly rotated ± 115 degrees, and the cable can be flexibly operated and rotated after being connected to the connecting slot of the motor. At the same time, the ximeconnm23 series hybrid connector adopts the tool free design at the interface, and the installation and removal of the connector can be completed by pressing the button with one key, which saves the time of disassembly and assembly with special tools.

Energy power battery connector PDU box connector

Accounts receivable computer M14 cable

Accounts receivable is equal to the interest free financing provided by the company to customers. Excessive accounts receivable will bring heavy burden to the company's capital.

Collection date: 1. Based on the annual sales revenue

2. The average value of accounts receivable at the beginning and the end (the concept of average value)

DSO - accounts receivable at the end of the period are mainly generated by the recent sales. Therefore, the balance of accounts receivable is deducted from the monthly sales amount month by month. When there is little difference between the business's revenue in the light and peak seasons, the calculation results of the two methods should be very close.

Computer M16 connector AISG assembly C091

Computer M16 connector AISG assembly C091 

How to decide the uncollectible amount of accounts receivable is a difficult problem. The most common way is to estimate it by historical experience or by referring to the standards of the same trade. We estimate the amount of bad debts during the accounting period of each month.



There are three common estimation methods (ATS currently adopts the third one)



Follow the credit sales amount of the current year, and provide a certain proportion of bad debt expenses (sales percentage method)



Based on the balance of accounts receivable at the end of the year (percentage method of account balance)



Individual recognition method (analyze receivables one by one to assess whether bad debt is accrued)

Computer M12 connector

Computer M12 connector There are two reasons for adopting the allowance account in Accounting:

The recognition of bad debts is an estimate, which may need to be adjusted over time. The total amount of original accounts receivable can be kept by using the allowance account, which is convenient for subsequent adjustment.

The estimation of bad debts is based on the concept of receivables. In fact, it is impossible to determine which customers' accounts need to be reduced. Therefore, in the way of allowance, the dilemma that customers' accounts receivable Sub Ledger cannot be reduced synchronously can be solved.

Computer M12 connector 

Selection and design considerations of waterproof USB Type-C connector

As consumer products become more and more intensive and files are transmitted, power requirements are increased and used in more demanding environments, traditional connection solutions will not meet the requirements. Although traditional USB and Microsoft USB connectors have become the standard of connection, USB Type-C is becoming the preferred connector solution for consumer products, because it provides higher performance, power and data connection, and is suitable for the shape of today's products. Real IPX8 waterproof USB Type-C connectors are increasingly required to meet customer requirements. Waterproof products are a trend in the industry because users want to be able to carry their devices with them. The waterproofing of the iPhone, Samsung Galaxy, Huawei's high-end mobile phones and other mobile phones is one of the features consumers need. This property also applies to other products, such as electric shavers, electric toothbrushes, POS terminals and wearable devices, as well as automotive, medical and industrial products. The last thing users need to worry about is the environmental sensitivity of electrical products.

Computer circular connector

Computer circular connector

Environmental protection: in order to provide environmental protection for users, waterproof USB type-C connector adopts rubber seal and seamless shell to prevent water. These connectors shall comply with ipx8 waterproof performance (IEC 60529), and shall be durable enough for thousands of plugging. The added board hold function helps to achieve robust design, providing high reliability and quality.

Computer circular connector

Automotive M9 cable push pull connector

Automotive M9 cable push pull connector

Signal integrity: higher signal integrity is equivalent to faster data rate, so USB type-C products with the best signal integrity are preferred, which should conform to USB 3.1 performance. In some cases, manufacturers use their experience with previous data products to provide 10Gb / s throughput. Power supply: USB type-C product can transmit up to 100 W power at 5 A, while in micro USB system, it can only transmit 10 W power at 0.5 a. Therefore, if the rest of the system is designed for faster charging, the device can charge faster.

Automotive M9 cable push pull connector