Tools Machinery industrial 5G M9 connector

Tools Machinery industrial 5G M9 connector The status quo of 5g and the launch of the new 5g mobile standard in the application field are in preparation. The initial requirements of the standard have been identified, and now its detailed definition and subsequent implementation are in the process of being initiated. The successor of current mobile standard LTE (4G) aims to improve latency, provide higher bandwidth, and create a foundation for new possible applications due to its enhanced performance. There will be several development levels or "releases.". 5g standardization starts from release 15

(R15), released in June 2019, mainly determines the current specifications of 5g mobile devices, including CPE and mobile phones. This version sets two frequency ranges: FR1 (frequency range 1) andTools Machinery industrial 5G M9 connector .

Previously below 6GHz, now (per R16) below 7.125ghz; and FR2, which has a frequency band below 52.6ghz, including part of the so-called mmwave spectrum.

Tools Machinery industrial 5G M9 connector

Cameras Peripherals M14 cable

Cameras Peripherals M14 cable

Most vandalism switches are designed with round buttons. The switch frame and actuator are made of stainless steel with high mechanical strength and chemical resistance. The actuator is the most frequently used part of the switch, and its shape design usually reduces the risk of potential saboteurs misoperation and damage.Cameras Peripherals M14 cable .

In a small design, the actuator helps to limit the distance between the switch and the panel, thereby minimizing damage caused by a screwdriver or other thin tool, while simplifying operation. These switches, also known as vandalism switches, are connected to the panel using the pre installation technology, further ensuring that the switch has a smooth outer contour by safely hiding the retaining nuts (called locknuts) behind the panel.Cameras Peripherals M14 cable .

Cameras Peripherals M14 cable

Cameras Peripherals M8 cable Switch

Cameras Peripherals M8 cable Switch

Switch is one of the most powerful components in electronic products. The function of the switch is different from other components and it is an important interface between the operator and the machine. Among all kinds of switches, one must be stronger than most, that is, vandalism proof switch. No matter what application, this type of switch must provide powerful function, reliable performance and solid protection, and also be easy to install and use. Cameras Peripherals M8 cable .Most importantly, these switches must provide reliable protection against malicious tampering and damage to equipment.

Cameras Peripherals M8 cable Switch

Low voltage apparatus M30 connector

Low voltage apparatus M30 connector

Low voltage apparatus M30 connector

The industrial batteries of the automobile electric vehicles are integrated together by the battery pack of the battery box, and the batteries of the low-power lithium battery are integrated together. After the copper bar and aluminum bar are fused and welded, they are connected and integrated together. When the bus bar is pressed on the main line, the output of the main line will become a state of high current and low voltage. This place will apply the plug and socket of the battery pack. When the bus bar is converged, the aluminum bar circuit g of the copper bar is mainly used GB7000 connector to complete the connection.

Li battery connecting line, socket with cover, Li battery charging XLR plug, t + XLR plug, total length about 80cm, Li battery electric vehicle charging interface, 36v48v charger output line plug, dc2.1 video head, Canon head, the same model, dc2.1 plug, 10 DC card socket, Li battery battery vehicle charging pile, conversion head, three hole XLR socket, three vertical pin socket, AC to XLR head Three hole XLR socket to three vertical socket electric scooter balance car Harley car charging port aviation empty XLR socket three hole plug small plug.

Low voltage apparatus M16 connector

Low voltage apparatus M16 connector 

Main products: Automobile Electric vehicle aviation Motorcycle E-bike Plug and socket of lithium battery pack XLR head XLR base copper bar aluminum bar circuit connector, GB7000 connector, GB4706connector, output line of lithium battery electric vehicle charger, charging round head port, male and female socket, dc2.5 (charger output line), output line of lithium battery electric vehicle charger, XLR plug and socket, three core charging port, lotus head, aviation head, such as dc2.1 female socket, socket panel, 16A Three hole XLR charging port with cover,

Low voltage apparatus M16 connector .

weak current equipment M16 cable M40 connector

weak current equipment M16 cable

4、 What do you do? It is better for the inventor to summarize what his overall technical solutions are and what technical features are included in these technical solutions. If the technical solution is hardware, what components does it include? What are the functions of the components? How are they connected? If the technical solution is software or method, what steps does it include? What is the function of each step? What is the order between the steps?

5、 What are the benefits?

6、 Specific implementation (how you do it). This part is a further refinement of the general technical scheme. It is better for the inventor to give several examples to elaborate how the general technical scheme is implemented. The description of this part is best combined with the attached drawings. For example, if the technical solution of the invention is hardware, the block diagram and structure diagram shall be given as detailed as possible, and if the technical solution of the invention is software or method, the flow diagram shall be given as detailed as possible.

weak current equipment M16 cable M40 connector

weak current equipment M12 cable

weak current equipment M12 cable The technical disclosure shall be able to reflect the following five aspects:

1、 What are you going to do? What is the inventor's invention? What is the name of invention? What is the technical field of invention and creation?

2、 What do others do? In other words, what is the background technology? What is the basis of invention? At the same time of introducing the current situation of the related technology field, the inventor should analyze what kind of shortcomings exist in the background technology to make the inventor continue to research, what are the reasons for the research, and what are the difficulties encountered? weak current equipment M12 cable.

3、 Why do you do it? Let's talk about why do you do it when similar technologies already exist? Specifically, it refers to the problems existing in the prior art to be solved by the invention and creation. That is to say, in the view of the inventor, what are the deficiencies or defects of the technical scheme or means introduced in the above background technology, so that the inventor can continue to study and finally make an invention on the basis of the above background technology?

weak current equipment M12 cable

weak current equipment M14 connector

weak current equipment M14 connector

Shrinkage cavity: the irregular shape and rough surface hole caused by insufficient internal compensation during the condensation process of die casting.

Under casting: filling incomplete parts in the process of die casting.

weak current equipment M14 connector

Crack: the alloy matrix is damaged or broken, forming a long and thin gap, which is irregular and linear. There are two kinds of cracks: penetrating and non penetrating

There is a trend of development under the influence of external forces. Cracks can be divided into cold cracks and hot cracks. The main difference is the cold crack casting

The metal at the crack is not oxidized while the hot crack is oxidized.

Wrong mold: when the mold is closed, the relative position of the moving part (including the movable part of the mold) and the fixed mold are not accurate, resulting in the dislocation (relative displacement) trace of the casting shape. In general, it is called wrong thread.

Non ferrous spot: a spot on the surface of a casting that is different from the color of the base metal. ,

Pockmarked surface: in the process of filling the cavity with liquid metal, fine pockmarks with linear distribution (mostly dense) are formed on the surface of the casting

The area formed.

Ejector mark: the mark of protrusion or depression left after the surface of the die-casting is in contact with the inlaid or movable part of the die, ejector, etc.

Inclusions: metal or non-metal impurities mixed into the die casting. After the casting is processed, the size of the irregular shape is shown here,

The spots or holes with different colors and brightness are often partially or completely filled with impurities.

Loose: the small holes on the die casting caused by aggregation or dispersion cause local non dense structure.

Flash: sheet metal on the edge of the parting surface (or moving part) of a die casting.

Fleshy: the same part of the surface of the die-casting repeatedly appears redundant protruding parts of the same shape.

Deformation: the overall deformation of the die-casting parts whose geometry does not conform to the drawing.

Mechanical damage: the scar on the surface of die casting caused by mechanical impact.

Brittleness: the grain of casting base metal is too coarse or small, which makes the casting easy to break or break.

Leakage: the die casting has water leakage, air leakage or water seepage after test.

weak current equipment M8 connector M9 connector

weak current equipment M8 connector

Air hole (sand hole): the hole with regular shape and smooth surface formed by the gas involved in the die casting.M9 connector

Flow mark: on the surface of the die casting, there is a line consistent with the flow direction of the liquid metal, which can be felt by hand to be locally depressed, which is a defect

There is no possibility of development.M10 connector

vacuum bipolar RF socket

Cold insulation: Joint mark caused by butt joint or non fusion of metal flow. Its intersection edge is smooth, with penetration and non penetration

Species have a trend of continuous development under the action of external forces.

Scratch: there is a certain depth of line like damage trace on the surface of the casting along the direction of casting, which is a stack of scars in serious cases.

Dent: a concave part on the smooth surface of a die casting.

Adherent trace: the trace left on the die casting due to the falling off of sheet metal or coating accumulation, if the sheet metal does not fall off,

If the local fusion has obvious metal layer on the casting, it is delamination.

Net burr: a net protrusion (or concave pattern) on the surface of the casting caused by the cracks on the surface of the mold cavity.

Bubble: the bubble formed by the gas bulging in the subcutaneous pores of the die casting.

weak current equipment M8 connector M9 connector

Industrial robot M10 connector

Industrial robot M10 connector Speed of medical connector

In order to ensure the success of this minimally invasive surgery, previous surgeons used to monitor and promote these types of operations by transmitting real-time images from patients' laparoscopic cameras. The modern connector technology allows these large amounts of data to be transmitted at high speed and has high integrity, which greatly promotes the success of these operations.

Industrial robot M10 connector

Industrial robot M10 connector

Industrial robot M16 connector medical connector Amphenel AISG C091 connector assembly

Industrial robot M16 connector medical connector

Components of medical connector

Industrial robot M16 connector medical connector Amphenel AISG C091 connector assemblySimilar to smart phones, medical devices have shape requirements. Thanks to recent medical advances, surgeons can perform certain operations. Some medical devices allow surgeons to perform their complex operations, such as bypass surgery, by creating a small incision and inserting a laparoscopic camera. The success of these types of operations also depends on the complex components within the medical device, such as connectors, and the ability of the operating system to perform and optimize the function of the device.

Industrial robot M16 connector medical connector Amphenel AISG C091 connector assembly

Communication Equipment M20 cable Insertion force

Communication Equipment M20 cable Insertion force

 Communication Equipment M20 cable Insertion force

a. Place the two matching electronic connectors in the initial position of the mechanical assembly, and the reading of the dynamometer and the torque meter is zero.

b. Fully insert (match) the connector according to the force rate specified in the specification, and record the peak value of insertion force.

3. Pull out force

Pull out the connector completely according to the force rate specified in the specification, and record the peak pulling force.

4. Details

When testing according to specifications, the following details will be explained:

(a) Number of samples tested

(b) Insertion force and pull-out force

(c) Plugging rate

(d) Possible insertion depth.

5. References

The data form includes:

(a) Test title

(b) Sample description including installation tools

(c) Test instruments used

(d) Test steps

(e) Assessment and observation

(f) Test date and operator name.

Communication Equipment M16 cable

Communication Equipment M16 cable Test instruments include:

1. Mounting fixture that allows the sample to be installed in a normal manner.

2. During the test, the force gauge or force distance gauge shall be placed in the proper position of the connector so that the reading pointer is in the middle of the gauge, so that the operation gauge can be accurate to ± 2%.

3. According to the requirements, the auxiliary measuring instrument shall match the test sample and be accompanied with the force measuring table and torque table (axial pressure, etc.).

b) . test steps

1. Unless otherwise specified, the sample shall be installed as normal.

Communication Equipment M16 cable

Communication Equipment M10 cable

Communication Equipment M10 cable Test method ා 13A -- Test Method for plug force of electronic connector

(from EIA recommendation No. 1653. Organized by EIA working group p-5.12.)

Note: tp-13a was previously published as tp-13 in EIA recommendation rs-364-3.

1. Purpose:

The purpose of this test is to introduce a standard method for determining the insertion force required for an electronic connector or its protective cover.

2. Sample preparation

The test sample consists of a plug and a contact socket. Unless otherwise specified, the sample shall consist of all available hardware including edges, hoods, clamps, screws, guides or sockets. Unless otherwise specified in the specification, the sample does not need to be lubricated or cleaned by any means.

3. Test method

a) . test instruments

Communication Equipment M12 x-code 8pins M30 connector

Communication Equipment  M12 x-code 8pins

Ximeconn has newly launched M12 x-code connector series, which conforms to iec61076-2-109 standard, and has cross shielding design to eliminate interference and unnecessary signals in signal transmission. Moreover, this connector meets the ultra-high requirements of signal transmission integrity from structural design and experimental test. The M12 x-code connector with 360 ° all-round shielding and cat 6A wire can achieve 10Gbps Ethernet transmission speed. Compared with the traditional RJ45 series or M128 core A-code connector (only supporting 10 / 100Mbps Ethernet transmission speed), there is no doubt that M12 x-code connector with more efficient transmission speed has more advantages.

M12 x-code connector is the most ideal solution for high-speed Ethernet transmission in wireless, camera, vision system and other harsh environments, because it not only has high-speed and robust data transmission characteristics, but also meets IP67 waterproof design.

Communication Equipment  M12 x-code 8pins 

Communication Equipment  M12 x-code 8pins 

Communication Equipment M16 connector

Communication Equipment M16 connector 

These are another embodiment of the struggle oriented. This care and consideration are not only "cool" on the body, but also warm in the heart. Everyone is happy to be able to work in such a company. Look at our production workshop, clean and bright floor, orderly U-shaped assembly line, such a spotless working environment, people feel more comfortable. Yes, we always pay attention to employees' feelings and create a good working environment for them. We have been improving

We believe that a good working environment can make employees happy physically and mentally, and can produce high-quality products. The level of enterprise management can be seen from the status of employees and the appearance of the factory.

Communication Equipment M12 connector

Communication Equipment M12 connector Ximeconn provides customers with male connector and panel type female connector with wire wrapping glue. The glue wrapping scheme can not only save the time of clients, but also provide a complete set of wire harness processing services. The PCB board inserting mode of panel type rear mount effectively saves the welding process. What's more amazing is that the x-code series has blind plug-in function, making it easier for customers to use.

Ximeconn will continue to launch a wide range of accessories series to expand the M12 x-code family, to meet or even exceed customers' changing needs.

 

Communication Equipment M12 connector

Industrial Ethernet M14 cable 19pin assembly

Industrial Ethernet M14 cable 19pin

Conclusion ① bronze is suitable for heat treatment. Solution treatment and subsequent aging treatment can significantly improve the mechanical properties of the alloy. ② The solution treatment of beryllium bronze is a process of stress relaxation and softening, and its plasticity is very good after solution treatment. ③ The aging treatment of beryllium bronze is a process of stress increasing and strengthening, and it has good elasticity after aging treatment. ④ The bright surface can be obtained by solution treatment and aging treatment in a protective atmosphere. When the surface quality of the material is not good, it can be pickled before solution treatment or aging treatment. ⑤ For the parts with strict size requirements, the correction after solution treatment and before aging treatment is very important. ⑥ The parts with hardness higher than the technical requirement after aging treatment can be saved by over aging treatment, and the bright surface can be obtained under the condition of atmosphere protection.

Industrial Ethernet M14 cable 19pin assembly

Industrial Ethernet M16 cable C091 and AISG meal assembly

Industrial Ethernet M16 cable C091 and AISG meal assembly Before the contact is inserted into the insulating mounting plate, the adhesive must be used, and then the epoxy resin or silicon sealing compound shall be used for pouring and sealing at the tail of the fixed connector and the free end connector, which shall be placed in a vacuum vessel with a heating device to exhaust until the gas is removed, and the pouring and sealing shall be conducted at a suitable temperature. According to the engineering technical manual and the conclusion drawn in the test, the air is ionized at about 7000 v, Therefore, the connector needs to be sealed in use. The sealing process of high-voltage connector is very sophisticated.

Industrial Ethernet M16 cable C091 and AISG meal assembly

Industrial Ethernet M12 cable 4pin 8pin 12pin 17pin

Industrial Ethernet M12 cable 4pin 8pin 12pin 17pin According to the engineering manual and the conclusion of the test, the air is ionized at about 7000 V, so the connector needs to be sealed in use. The sealing process of high-voltage connector is very sophisticated. The contact between contact and cable must be bonded with insulation mounting plate, and the insulator must be bonded with the shell of connector.

Industrial Ethernet M12 cable 4pin 8pin 12pin 17pin