Existing electronic instruments, such as ammeters,
often need external connecting wires. If the connecting wires are not fixed,
they can easily be pulled out, thus destroying the motherboard and the devices
connected with them. In order to fix the connecting wire and prevent it from
pulling out, the existing methods are usually as follows: 1. The connecting
wire is bound by a pressure plate or a tie-in belt, and then the pressure plate
or tie-in belt is fixed on the surface shell with a screw. This method requires
additional fixed mechanism, high production cost, installation trouble, and is
not suitable for use in a smaller space; 2. Knot the connection lines. The
knotting position of this method is not well controlled and the operation is
inconvenient. 3. Increase the thread fastening parts, or directly process the
thread fastening on the connecting line to become a part with the connecting
line. This method has a high production cost. Therefore, it is necessary to
develop an electronic instrument with anti-pull-out structure of connecting
wires, which can not only increase cost, save space and install conveniently,
but also have good anti-pull-out effect
usb-c cable
vacuum bipolar RF socket
push pull connector
No comments:
Post a Comment