Cameras Peripherals It is clearly identified in the drawing.

5.1.4.4 ergonomics level

The ergonomic test level of parts shall be in accordance with the requirements of SAE / uscar25. This level should be in the test plan and

It is clearly identified in the drawing.

Test end plates and direct connection components

It often happens that we only have a part of the connector, usually part of the socket, and it is directly connected with one

One end plate or socket for an electrical component or device. This creates special test problems. In order to be able to execute completely

For electrical connection test, we must be able to touch the terminals in the equipment or end plate. In these cases, great care must be taken to

Avoid leakage circuit in body applications. If the risk is unacceptable, or it is not possible to establish it necessary

For electrical connections, the tests that usually need to verify the integrity of the connection must be modified.

Sometimes, some other problems may occur due to the terminal in the equipment or terminal board or the length of the bus bar bus in the electrical performance test.