Industrial Electronics M6 connector Acceptance criteria.
7. Repeat steps 2-6 for each pair of
terminals (one plug and one socket).
8. (optional) repeat steps 2-7, except
replace the plug terminals with an applicable gauge. Use new socket terminals.
can
Suitable gauges shall be made of polished
steel with a nominal value less than 0.01 mm. The surface finish must be at
least
076-0.305 microns (3-12 microinches). The
polishing direction must be parallel to the length of the blade / plug pin. try
Another 10 socket terminal samples were
tested to determine the force interaction between the polishing gauge and the
actual sample.Industrial Electronics M6 connector
No comments:
Post a Comment