usb-c cable M8 connector push pull connector

usb-c cable 

M8 connector

push pull connector

The fabrication method of multi-layer flexible printed circuit board can realize the micro-circuit of surface wiring layer in multi-layer flexible printed circuit board, so as not to hinder the high-density installation. However, flexible printed circuit boards can be used in low performance and low operating frequency environments, as well as in high performance and high operating frequency environments. In order to be suitable for high operating frequency environment, the structure design and manufacturing process of flexible printed circuit board is relatively difficult and high cost. This is because the electromagnetic interference between the signal lines on the same layer and between the signal lines on the adjacent layer will become obvious, which will affect the quality of the signal transmission.

usb-c cable M12 adapter vacuum bipolar RF socket

usb-c cable 

M12 adapter

vacuum bipolar RF socket

Flexible printed circuit boards can be divided into one-sided, two-sided and multi-layer boards. Polyimide copper clad laminates are the main substrates used. This material has high heat resistance, good dimensional stability, and the final product is made by pressing the covering film with both mechanical protection and good electrical insulation. Polyimide resin is a kind of heat-resistant resin with five negative rings of imide, which is represented by polyphenylenetetraacid produced by the reaction of oxygen-containing layer group and anhydrous phenylenetetraacid. The conductors used in flexible printed circuit boards are thin foil copper, which is called copper foil. Its manufacturing methods can be divided into electrolytic copper foil and calendered copper foil, in which calendered copper foil is the mainstream. In addition, the surface and inner conductors of double-sided and multi-layer printed circuit boards are metallized to realize the electrical connection between the inner and outer circuit layers.usb-c cable M12 adapter vacuum bipolar RF socket

M12 Product Description

An ultra-high speed, 10 Gb Ethernet interconnect solution for commercial aviation, military aircraft and marine applications, ITT Cannon's OctoGig^TM is smaller, lighter, easier to install and offers significant increases in data transfer rates compared to existing solutions on the market. A high-bandwidth data offering that offers a tenfold increase in transfer rates, OctoGig’s eight-conductor termini provides reduced size and weight, ease of installation and transfer rates to 10 Gbps, generating higher-performance and cost-efficiency. OctoGig can be integrated into a variety of popular connector systems to satisfy a diverse spectrum of applications in Aircraft Navigation & IFE applications

M12 adapter waterproof circular connectors M5 connector

M12 adapter 

waterproof circular connectors 

M5 connector

ximeconn provides several special wiring components to help complete your system. Any system with batteries requires battery interconnection cables and battery and inverter cables. If you want to produce your own battery cables, we also provide edged cables and wire tools. In addition to wiring between solar modules, between batteries and between batteries and inverters, you also need wiring from Combiner boxes to batteries - sometimes referred to as home runs. Because there are wires in most places, the size of the wires may be different, and the wires are often very heavy and expensive to transport, so we often do not sell them on foot.

waterproof circular connectors M5 connector M23 circular connectors

Outdoor Customized Formed Cable

Most solar modules are now manufactured with multi-contact cable connectors (mc connectors for short), which makes a series of connections easier. If you have the right product, it's easy to parallelize solar modules. The MC connector provides a connection between the solar module and the comber and the channel box. The appropriate length of your MC connector is about twice the distance between the solar array and the assembly box. Simply insert the MC connector into the lead of the solar module, cut the connector in half, and then run the bare end of the connector to the Combiner box. Don't cut off the MC wire of your solar panel! This may invalidate the manufacturer's warranty.

waterproof circular connectors


M5 connector


M23 circular connectors

M12 connector waterproof connector

 The assembly and tightening unit comprises a second clamping mechanism and a tightening mechanism movably connected to the frame, and the second clamping mechanism clamps and fixes the connection of the photovoltaic connector. The driving unit in turn drives the second clamping mechanism to move and cooperate with one end of the cable segment, and drives the tightening mechanism to tighten the cap.

As a preferred choice, the assembly tightening unit also includes a second light-controlled switch, which is arranged in the second clamping mechanism and controls the operation of the tightening mechanism when the terminals at one end of the cable segment and the connecting head are in place.

Solar cables, vacuum bipolar RF socket, push pull connector

A photovoltaic connector assembly tightening device, including a rack and a driving unit, and product components to be assembled include a photovoltaic connector, a cable and two terminals. The photovoltaic connector includes a connecting head and a rotating cap. The rack is equipped with:

The stripping tangential unit comprises a fixed length roller for delivering a constant length cable and a stripping tangential knife for dividing the cable into fixed length and exposed cable segments with two metal cores. The stripping tangential knife comprises a tangential knife and two stripping knives arranged on both sides of the tangential knife to strip the plastic outer skin on both sides while cutting the cable so as to make the metal cores on both sides. Expose;

Two terminals are respectively pressed on the terminal pressing unit of the metal wire core fixed at the two ends of the cable segment; the terminal pressing unit is used to press the cylindrical terminal at one end of the cable segment and the annular terminal at the other end of the cable segment. 

Solar cables

vacuum bipolar RF socket

push pull connector

vacuum bipolar RF socket M12 adapter push pull connector

vacuum bipolar RF socket 

M12 adapter 

push pull connector

In the process of using photovoltaic connector, it is necessary to attach the cable to the photovoltaic connector after putting the terminal, and then fix the cable to the photovoltaic connector by tightening the cap of the photovoltaic connector. If it is assembled manually, it is necessary to separate and peel the cables, press the terminals at the two ends of the cables, and assemble the cables and photovoltaic connectors. The automation level is low, the labor cost is high, and the production efficiency is low.

MC4 connector for photovoltaic special purpose includes a connecting head

An intelligent fire-proof MC4 connector for photovoltaic special purpose includes a connecting head and a parent head, which are provided with insulating material stamens. Its features are as follows: a fire-proof mechanism and a guide strip are also included; the stamens are set as two-segment structures with fixed internal cavity, and the fire-proof mechanism is set in the cavity, and the guide strips in each section of the structure are connected by a fire-proof mechanism. 2. The photovoltaic intelligent fire-proof MC4 joint described in Fig. 1 is characterized by: the fire-proof mechanism includes a guide plate, a spring, a force bar and a high temperature thrust device. The guide bars of each section of the mechanism are respectively connected with a guide plate through a spring, and each guide plate is connected by a relative top contact of the spring. A force bar is clamped on each spring, and an absolute force bar is arranged between the force bars. High temperature thrust device with edge material. 3. According to claim 2, the photovoltaic intelligent fire-proof MC4 joint is characterized in that the high temperature thrust device is a bellows filled with mercury liquid. 4. The intelligent fire-proof MC4 connector for photovoltaic special purpose described in Fig. 1 is characterized in that the insertion is fixed to a threaded insertion. 5. The photovoltaic intelligent fire-proof MC4 joint described in the Fig. 1 is characterized in that the two-stage structure is a cylindrical structure.

M8 connector M5 connector M23 circular connectors

M8 connector 

M5 connector 

M23 circular connectors

With the increasing depletion of global energy resources, the pace of human search for new alternative energy sources is also accelerating. Solar energy is a renewable resource. Converting solar energy into electric energy can not only save energy, alleviate the shortage of power supply, but also reduce environmental pollution. Therefore, solar photovoltaic technology is attracting more and more public attention and favor. Photovoltaic cells are made of materials that can produce photovoltaic effects, such as silicon, gallium arsenide, indium, copper or other materials, which use photovoltaic effects to convert light energy into electricity. At present, photovoltaic modules composed of several photovoltaic cells are widely used, for example, photovoltaic modules are used to build power generation systems, or as curtain walls or roofs of buildings.

M12 connectors M8 connector push pull connector

The system operation principle of the utility model is that the short circuit of the photovoltaic module causes the overheating of cables and joints. Before the cables are overheated and ignited, the customized high-temperature thrust device filled with mercury liquid will reflect the super-high temperature. When the designed temperature is exceeded or reached, such as 80-90 degrees Celsius, the mercury liquid volume will be multiplied, and the thrust force of the normal contact spring will be greater than that of the normal contact spring. The force acts on the force bar. When the force of the force bar is higher than the normal spring top contact thrust, the lead plate will be separated, and the internal electrical circuit of the two sections of the male stamen structure will be cut off, so that the current can not be turned on. All the electrical circuits of the 20 photovoltaic modules in this series will be suspended without any current output, so that fire can be prevented. Operating and maintenance personnel can also take the first place. At one time, it was found from the monitoring system and arrived at the specific site to deal with and eliminate the danger.

m12 CONNECTORS

 M8 connector 

push pull connector

waterproof connector notes

 In recent years, the development trend of electronic semiconductors continues to pursue miniaturization, high efficiency, low consumption and low cost. Because through Silicon Via (TSV) uses laser to drill holes in wafers or chips, and then fills conductive materials into the holes to form conductive paths, which vertically connect the upper and lower surfaces of the same chip to facilitate the stacking of multiple chips, this technology is called three-dimensional integrated circuit (3D IC) construction technology. Compared with the previous multi-chip packaging, three-dimensional packaging technology can shorten the signal transmission path through stacking of multiple chips, make the signal transmission faster, and reduce the space occupied by the package. These advantages make 3D IC become the technology developed by various semiconductor manufacturers, and also become the key to maintain the competitiveness of the domestic IC manufacturing and sealing industry. 

usb-c cable waterproof circular connectors M5 connector

Connecting structure for automobile and automobile, in which the connecting structure for automobile includes: A-pillar guard plate; dashboard, the end of which is provided with a connecting surface and an elastic clamping system, the A-pillar guard plate is clamped between the elastic clamping system and the connecting surface, and the elastic clamping system is used to exert elastic pressure on the A-pillar guard plate towards the connecting surface in order to apply elastic pressure to the connecting surface with the A-pillar guard plate. The connecting surface cooperates with the elastic clamping of the A-pillar upper guard plate. The utility model can improve the interior quality of automobiles.

usb-c cable

waterproof circular connectors 

M5 connector

vacuum bipolar RF socket usb-c cable push pull connector

Existing electronic instruments, such as ammeters, often need external connecting wires. If the connecting wires are not fixed, they can easily be pulled out, thus destroying the motherboard and the devices connected with them. In order to fix the connecting wire and prevent it from pulling out, the existing methods are usually as follows: 1. The connecting wire is bound by a pressure plate or a tie-in belt, and then the pressure plate or tie-in belt is fixed on the surface shell with a screw. This method requires additional fixed mechanism, high production cost, installation trouble, and is not suitable for use in a smaller space; 2. Knot the connection lines. The knotting position of this method is not well controlled and the operation is inconvenient. 3. Increase the thread fastening parts, or directly process the thread fastening on the connecting line to become a part with the connecting line. This method has a high production cost. Therefore, it is necessary to develop an electronic instrument with anti-pull-out structure of connecting wires, which can not only increase cost, save space and install conveniently, but also have good anti-pull-out effect

usb-c cable

vacuum bipolar RF socket

push pull connector

Application field of circular push-pull self-locking connector

Connector is widely used in all fields around us. For people in the electronic market, connector is not unfamiliar. It is a fairly simple function of the widget, but it plays an important bridge in all fields. It is this insignificant component that reflects its particularity, almost in all electronic fields, or It will be used more or less.

Then we will summarize the main products of Shenzhen Jilongtai Connector Co., Ltd. circular push-pull self-locking connectors will be used in what areas:

1. Medical equipment.

Looking around, we can easily find that in some of our country's medical markets, such as medical equipment, beauty equipment clocks, many will use circular push-pull self-locking connectors, both metal and plastic. Medical industry is closely related to our health. Connectors play a very important role in these devices. For example, when the circuit is suddenly blocked, it is easy to cause some very serious accidents. If the connector is used, it is easy to find out the fault point of the line and repair the line immediately. At the same time, the connector also solves the complex wiring problem and facilitates the use of medical staff, which not only improves the efficiency of medical staff, but also further improves the safety of medical equipment.

2. Film and TV equipment.

In the film and television industry, circular push-pull self-locking connector plays a very important role. First of all, our circular push-pull self-locking connector has great advantages in transmitting audio and video signals, with fast transmission speed and low loss. Secondly, the push-pull self-locking structure here also fully reflects its advantages different from other connectors. Push-pull self-locking has been known for its simple and fast insertion method since its inception. It can effectively resist vibration and shock, and effectively prevent the cable from pulling away from the cable. It is absolutely safe and reliable. This easy to plug, easy to pull out and difficult to pull out the security performance, effectively prevent the loss or loss of data of the cameras and projectors that are working during the working period.

3. Testing equipment.

Round push-pull self-locking connectors have been used in nondestructive testers, hardness testers, vibration testers and flow meters.

In addition to the above three aspects, there are aerospace, instrumentation, military equipment and other industries, in which the value of connectors is immeasurable.

In the new trend of development, the rise of new energy has also led to the rapid development of connector industry. Similarly, new energy vehicles, solar street lamps, wind power and so on.

M12 connectors Push-pull Self-locking Connector

M12 connectors

M8 connector

M9 push pull connector

Wire Sealing of Push-pull Self-locking Connector

The conductor seal includes free end push-pull self-locking connector and fixed end push-pull self-locking connector conductor seal. For fluoroplastics wire, in order to make the wire bond firmly, it is necessary to spray sand on the bonding part of the wire to make its surface rough, and then use strong oxidizing agent to corrode the wire. The corrosion process causes the molecule reaction on the wire surface to form a free radical carbon-containing film. The carbon-containing film reacts with the sealing binder to form a real chemical bond.

When welding wires and contacts, the area of solder joints should be small and even with the surface of contacts. On the one hand, the large area of solder joints can avoid destroying the surface coating of contacts, on the other hand, the tip discharge caused by the protrusion or depression of solder joints can be avoided, and the "air pump" can easily be formed by gas adsorption during molding.

usb-c cable M12 adapter M12 connectors

usb-c cable  

M12 adapter 

M12 connectors  X-coded 8pins

It is a circular push-pull self-locking connector for some devices near the frame which need blind connection. It can make the electrical equipment lighter, smaller, easier to maintain and more reliable. This form of connection makes the operator unable to feel the connection. It is necessary to design an accurate positioning device to avoid forcing the incorrectly inserted circular push-pull self-locking connectors together, which makes the incorrect insertion impossible. Cabinet type round push-pull self-locking connector usually adopts floating or elastic contact design structure to ensure its correct connection.

Aviation Plug Material Should Choose Environmental Protection Material

Aviation Plug Material Should Choose Environmental Protection Material

The reflow welding technology is used for electrical connectors. The temperature of this welding technology is higher than that of fluctuating welding, which means that the material of electrical connectors needs to be able to resist significantly higher temperature. Usually, the heating deformation temperature of general materials is higher than 250 C. In order to meet the reflow welding technology, PA6 and PBT can not meet the requirement that the heating deformation temperature of materials is higher than 250 C, so they need to be replaced by high temperature resistant materials. This is the case.

M12 connectors|vacuum bipolar RF socket|M23 circular connectors

Considering the use of harness environment, harness sheath is needed in extreme environment, such as high temperature, extreme cold, acid-base corrosion, oil pollution and wear.

It can be divided into PVC tube, PU tube, bellows, fiber net, foam tube and so on. The size of the pipe is marked by its diameter. The bigger the diameter, the thicker the pipe.

PVC pipes are widely used, mainly to prevent the wiring harness from spreading, smooth surface, hard in winter, brittle and fragile for a long time, there are openings and closures. Most of the colours are black.

PU pipe, smooth surface, soft material, long service life, there are openings and closures, the color is mostly black.

Fiber network management, the main role is to prevent the harness from spreading, relatively more flexible.

Bellows, mostly coarser wiring harness, oil resistance, acid and alkali resistance, etc.

M12 connectors

vacuum bipolar RF socket

M23 circular connectors

waterproof circular connectors M5 connector M23 circular connectors

waterproof circular connectors 

M5 connector

M23 circular connectors

With the continuous development and innovation of Kuala Lungtai wire harness customization technology, we can now provide all-round electronic wire harness, household appliances wire harness, industrial wire harness and other wire harness manufacturing for new and old customers. Main products: financial equipment wiring harness, communication wiring harness, medical equipment wiring harness, office equipment wiring harness, intelligent household appliances wiring harness, automobile wiring harness, locomotive wiring harness, lighting facilities wiring harness, and various special connection wiring materials. Products are widely used in computers, household appliances, instruments, automobiles, machine tools, medical devices, electronics, industrial automation and other high-tech electrical products.