Industrial Electronics M30 cable Make a suitable mark on the terminal so
that the person performing the test can make the only correct pair for the
terminal, and
The test terminals to be engaged are
inserted to the correct depth. It is not allowed to mark with scratches or
other pollutants
Or change the strength or conductivity of
the plug terminal or interface. Do not use the sheath of the connector, i.e Industrial Electronics M30 cable 。
Make it unclosed to control the insertion
depth of the terminal, because the sheath will change the heat dissipation
state during the test. such
Doing this will reduce the repeatability of
the test and invalidate the comparative data collected for the various
terminals.
No comments:
Post a Comment