USB Camera cable splitter Retention of end plate pins
5.7.1.1 purpose
The terminal pull-out test is used to determine the retention force of the socket terminal under the conditions of a specific pin or a molded end plate connector.
It can also be used to test the attachment of the plug pin when it is directly fixed or soldered to the circuit board. Appropriate pin protection
The holding force can ensure that the terminal will not be replaced by the normal insertion and pull-out force of the mating connector. These requirements can only be applied to
Finished devices, not for "in process" products, such as pin blocks or other semi assembled products. Units and / or connections
The provider needs to decide at which stage of the process these requirements will be tested and validated.
5.7.1.2 equipment
The insertion / pull-out force tester with peak number characteristics.
Suitable connector fixing device.
{collets, spindles or clamps holding terminals and / or pins in a longitudinal direction.
5.7.1.3 operation process USB Camera cable splitter Retention of end plate pins.
Note: the sample should be produced according to the intention of the product. For structures with very close pin arrangements, pins or terminals need to be selectively grounded
No comments:
Post a Comment